Ceria based mixed conductors with adjusted electronic conductivity in the bulk and/or along grain boundaries

Ceramic samples of Ce1 − xPrxO2 − δ (CPO) and Ce1 − xGdxO2 − δ (CGO) were obtained by different sintering schedules, including the use of cobalt as a sintering aid, added by mixing the precursor powders with cobalt nitrate solution; this allowed one to obtain different microstructural features and to change the transport properties, with emphasis on changes in grain boundary behaviour. Cobalt plays a double effect as sintering aid and also to induce important changes of grain boundary properties. Specific changes of grain boundary properties were ascribed by de-convolution of impedance spectra. vely high levels of mixed conductivity could be attained by adding a lanthanide species to yield ionic transport, whereas electronic conduction was promoted by the mixed valence character of PrOx, combined with the additional contribution of Co-rich grain boundaries. These effects can be used to tune preferential electronic conductivity at bulk or grain boundary level. Oxygen permeability and a modified e.m.f. method were used to obtain the overall ionic transport number under oxidising conditions and its dependence on processing conditions. Additions of PrOx induce bulk electronic conduction which assumes a greater role at lower temperatures. Further enhancement of electronic conductivity is attained by effects of Co-addition. Though Co-rich grain boundaries also yield significant levels of electronic conductivity in CGO, this contribution becomes minor at intermediate temperatures, due to differences between the activation energies for electronic and ionic conduction.