Enhancement of the mechanical properties of poly(styrene-co-acrylonitrile) with poly(methyl methacrylate)-grafted multiwalled carbon nanotubes

Poly(methyl methacrylate) (PMMA) was grafted onto multiwalled carbon nanotubes (MWNTs). Composites of PMMA-grafted MWNTs and poly(styrene-co-acrylonitrile) (SAN) were prepared by solution casting from tetrahydrofuran. Since PMMA is miscible with SAN, the two polymers mix intimately to facilitate the dispersion of PMMA-grafted MWNTs in the SAN matrix. The intimate mixing is evidenced by the transparency of the composites. The incorporation of PMMA-grafted MWNTs to SAN (effective MWNT content=0.5–2 wt%) leads to increases in storage modulus at 40 °C, Youngʹs modulus, tensile strength, ultimate strain, and toughness by 90, 51, 99, 184 and 614%, respectively. Such simultaneous increases in stiffness, strength, ductility and toughness of a polymer by rigid fillers are rarely observed.