The effect of knee-flexion angle on wheelchair turning

The increasingly popular hyperflexed knee-flexion angle was evaluated to determine its effects on wheelchair turning. Twenty able-bodied subjects were tested comparing the effect of full knee extension and full knee flexion on a number of parameters. We empirically measured the angular velocity of subjects spinning 720° in place, subjectsʹ perceived ease of wheelchair turning, the overall length of the wheelchair, the anteroposterior position of the center of mass (COM), rolling resistance, turning resistance and rear-wheel traction. The combined moment of inertia of the wheelchair and system was modeled. We found that, in comparison with full extension, fully flexing the knees increased angular velocity by 40% and was perceived to be 66% easier by subjects. Overall length decreased by 39%, COM moved rearward 38%, rolling and turning resistance decreased by 21% and 17% respectively, rear-wheel traction increased by 12% and moment of inertia decreased by 42%. All empirically tested parameters were statistically significant (p<0.007). We conclude that the knee-flexion angle has a significant effect on wheelchair turning. The implications of these findings for wheelchair design and prescription will need to be validated on actual wheelchair users and for smaller increments in knee-flexion range.