• Title of article

    Investigation into the detection of marker movement by biplanar RSA

  • Author/Authors

    Montagna، نويسنده , , Luisa and Bragonzoni، نويسنده , , Laura and Zampagni، نويسنده , , Maria Luisa and Russo، نويسنده , , Alessandro and Motta، نويسنده , , Mario and Albisinni، نويسنده , , Ugo and Marcacci، نويسنده , , Maurilio، نويسنده ,

  • Issue Information
    روزنامه با شماره پیاپی سال 2005
  • Pages
    8
  • From page
    641
  • To page
    648
  • Abstract
    Roentgen Stereophotogrammetric Analysis (RSA) is the most accurate technique to measure micromotion between rigid bodies and it has been widely used in the orthopedic field to investigate lower limb prostheses. m of this paper was to investigate the factors affecting the accuracy of measurements performed on the knee joint by the biplanar RSA system. Errors were assessed by means of a test object. A particular goal was to verify the reliability of the system when the patient cannot stand in the ideal position during the examination, i.e. in the centre of the calibration space. Results showed that detection of micromotion is not correlated to the position of markers inside the calibration space. fluence of different materials able to simulate human tissues, both hard and soft, on the data acquisition phase was also investigated. This additional exam was performed to assess whether the results obtained were similar also under as close as possible conditions to the clinical trials. Different experimental conditions were shown to not affect the acquisition phase of RSA procedure; markers were acquired with equal accuracy independently of tissues examined. the acquisition procedure is often performed by different operators, the difference between acquisitions made by different operators was compared. tudy confirms the reliability of RSA and its accuracy, also in non-standard clinical setup and acquisition procedures.
  • Keywords
    accuracy , Movement detection , 3D Spatial location , Roentgen stereophotogrammetric analysis
  • Journal title
    Medical Engineering and Physics
  • Serial Year
    2005
  • Journal title
    Medical Engineering and Physics
  • Record number

    1728773