Surface fluids effects on the bladder tissue characterisation using electrical impedance spectroscopy

The electrical impedance of the human urinary bladder in both benign and malignant areas can be measured using an electrical impedance spectroscopy system (EIS). Glycine is usually used in the bladder surgery in the theatre to make an insulation medium for electro-surgery and the extension of the mucosa. In addition, a saline solution is usually used to wash the inside of the bladder after bladder surgery and it is used to extend the bladder tissue mucosa. Therefore, the effect of glycine and the saline solution that fills the bladder is important, because it was expected that the application of common surface fluids (air, saline solution and glycine solution) in the bladder epithelium would affect the measured electrical impedance of the urothelium, to differentiate the malignant area from the normal bladder tissue. In this study, bladders were removed from the patients’ bodies and then were moved from theatre to the histopathology department immediately after excision. These bladder samples were then opened and pinned to a corkboard to take the impedance readings, using the impedance spectroscopy system. Following this, the bladder and corkboard were completely submerged in a saline solution and readings were taken at about 1 cm from the sutures. Subsequently, this procedure was repeated with the bladder submerged in glycine and then air, respectively. According to the statistical work, these fluids were found to have a significant effect on the measured impedance of the bladder tissue in benign and malignant areas. Furthermore, the best fluid between air, glycine and saline, to measure the impedance of the urinary bladder, is air (P < 0.0001).