Elaboration and properties of novel biobased nanocomposites with halloysite nanotubes and thermoplastic polyurethane from dimerized fatty acids

Nanocomposites of biobased thermoplastic polyurethane (TPU) from dimer fatty acids and halloysite nanotubes (HNT) were elaborated by different melt processing routes such as direct mixing (1 step process) and masterbatch/dilution (2 steps process), at different temperatures (150 and 180 °C). Rheological and transmission electron microscopy (TEM) analyses indicated that the HNT distribution and dispersion were dependent on the processing conditions: the 2 steps process produced well dispersed nanocomposites and the masterbatch dilution at 180 °C improved the HNT distribution through the TPU. Consequently, a high reinforcement was achieved, with a 40% increase in the elastic modulus and 8 °C increase in the relaxation temperature related to the glass transition of the TPU soft segments. Furthermore, a percolated network was attained, even if a large extent of HNT breaking was observed during processing, suggesting that a synergistic effect between the HNT particles and the TPUʹs hard segments in the molten state occurred. Thus, HNT nanotubes can be seen as highly reinforcing nanofillers when good dispersion and distribution are achieved through the polymeric matrix.