Controlling the electrical characteristics of Al/p-Si structures through Bi4Ti3O12 interfacial layer

In this study, the effects of high permittivity interfacial Bi4Ti3O12 (BTO) layer deposition on the main electrical parameters; such as barrier height, series resistance, rectifying ratio, interface states and shunt resistance, of Al/p-Si structures are investigated using the current–voltage (I–V) and admittance measurements (capacitance–voltage, C–V and conductance–voltage, G/ω–V) at 1 MHz and room temperature. I–V characteristics revealed that, due to BTO layer deposition, series resistance values that were calculated by both Ohmʹs law and Cheungʹs method decreased whereas shunt resistance values increased. Therefore, leakage current value decreased significantly by almost 35 times as a result of high permittivity interfacial BTO layer. Moreover, rectifying ratio was improved through BTO interfacial layer deposition. I–V data indicated that high permittivity interfacial BTO layer also led to an increase in barrier height. Same result was also obtained through C–V data. Obtained results showed that the performance of the device is considerably dependent on high permittivity BTO interfacial layer.