Non-destructive evaluation of plasma sprayed functionally graded thermal barrier coatings

Acoustic emission (AE) as a non-destructive evaluation technique has recently been used in a number of studies to investigate the performance and failure behavior of plasma sprayed thermal barrier coatings. The mechanism of coating failure is complex, especially when considering the composite nature of the coating. In the present paper, the thermal shock tests with in situ acoustic emission are used to study the cracking behavior of plasma sprayed functionally graded thermal barrier coatings. Each thermal cycle consists of 8 min heating in the furnace at 1000°C and 8 min cooling from 1000°C to the room temperature by a compressed air jet. The AE signals are recorded during the quench stage. Three, four and five layer functionally graded coatings have been tested. The results show that the five layer functionally graded coatings appear to have the best thermal shock resistance in the specimens tested, because of the gradual changes in material properties. Higher AE energy counts and cumulative counts recorded by the tests are associated with the macro-crack initiation and growth. On the other hand, micro cracking and phase transformation only give rise to lower AE signals.