Surface treatment of metals using an atmospheric pressure plasma jet and their surface characteristics

We have treated the surfaces of Al, SUS and Cu metals using an atmospheric-pressure plasma jet generated by nitrogen and oxygen gases under the atmospheric pressure at room temperature. The plasma ignition occurred by flowing mixed gases between two coaxial metal electrodes, and the voltage was applied with impulse type and 16–20 kHz frequencies. The treated surfaces were basically characterized by means of a contact angle analyzer for the activation property on their surfaces. From the results of XPS, FE-SEM, OES and AFM, we could confirm that the main phenomena such as the reactive etching and oxidation were observed on their surfaces as well as even the aggregation of particles by the activated atoms, radicals and metastable species in the plasma space. However, all treated surfaces contained only oxygen and carbon without nitrogen, even though the excited nitrogen species were generated in the plasma due to its higher reactivity than oxygen ones observed in the OES data. The aging effect on the duration time of the surface energy, moreover, was also studied because of the production cost on the industrial applications in addition.