Effect of morphology on thermal conductivity of EB-PVD PYSZ TBCs

Partially yttria stabilized zirconia (PYSZ) based thermal barrier coatings (TBC) manufactured by electron beam-physical vapour deposition (EB-PVD) protect turbine blades, working under severe service conditions in aero engines and stationary turbines. These coatings show a high strain tolerance relying on their unique morphology which is comprised of weakly bonded, preferred-oriented columns, voids between feather-like sub-columns and, finally, of intra-columnar closed pores. sults obtained in this work demonstrate that variation of the EB-PVD process parameters alters the resulting columnar morphology and porosity of the coatings. The physical properties and, most importantly, thermal conductivity, are greatly affected by these morphological alterations. This study investigates three morphologically different EB-PVD PYSZ TBC top coats in terms of the spatial and geometrical characteristics of their porosity and correlates those with the thermal conductivity values measured in as-coated state and after heat treatment at 1100 °C for 1 h and 100 h. Changes in the open and closed porosity caused by heat-treatment are characterized by small-angle neutron scattering (SANS), Brunauer–Emmett–Teller Method (BET) and scanning electron microscope (SEM). Correlation of shape and surface-area changes in all porosity types of the analysed coatings revealed that the thermal conductivity of these coatings is influenced primarily by size and shape distribution of the pores and secondarily by the pore surface-area available at the cross section perpendicular to the heat flux.