Surface modification of polyester fabrics for inkjet printing with atmospheric-pressure air/Ar plasma

Without any preprocessing, polyester fabric has a lower ability to hold on water and inks due to the smooth morphology and chemistry property of polyester fibers. Therefore, patterns directly printed with pigment inks have poor color yields and bleed easily. Plasma surface treatment of polyester fabrics was carried out in composite atmosphere with air and 10% Ar under different experimental conditions. After plasma treatment the samples were printed with pigment inks. The results show that surface-modified polyester fabrics exhibited enhanced color yields and excellent pattern sharpness. SEM and XPS analyses indicated that this improved color performance was mainly contributed by not only the etching effect but also oxygen-containing polar groups induced onto fiber surfaces through plasma treatment. Thereby the surface modification of polyester fabrics using air/Ar plasma offers a potential way to fabric pretreatment for pigment inkjet printing with the advantages of environmental friendly and energy saving over traditional pretreatment methods.