Plasma-assisted Pt and Pt–Pd nano-particles deposition on carbon carriers for application in PEM electrochemical cells

Plasma-assisted deposition of platinum and platinum-palladium nano-particles at the surface of carbonaceous electronic carriers for application in proton-exchange membrane (PEM) electrochemical cells has been carried out using a conventional DC magnetron sputtering system. Different types of carrier have been used for that purpose: carbon powder (Vulcan XC-72), carbon nanotubes and carbon nano-fibers. The interest of initial chemical pretreatment or metallization of the electronic carrier to improve surface adhesion of catalyst nano-particles has been analyzed. Nanostructured catalytic powders thus obtained have been analyzed and characterized using TGA, SEM, TEM, XRD, XRF and cyclic voltammetry. The electrochemical performances of Pt/C and Pt–Pd/C electrodes have been measured in single-cell PEM fuel cell (PEMFC), water electrolyzer (PEMWE) and unitized regenerative fuel cell (URFC). Results show a high active surface area (up to 44 m2 g−1) and high electrochemical activity for a number of synthesized samples. A qualitative correlation has been established between sputtering parameters, type of carbon carrier and performances as electrocatalyst.