HI decomposition over PtNi/C bimetallic catalysts prepared by electroless plating

The catalytic decomposition of hydrogen iodide (HI) has drawn increasing attention because it is the key reaction for hydrogen production in the Iodine–sulfur (IS) thermochemical water splitting cycle, which is considered one of the most promising alternative methods for massive hydrogen production with high efficiency and without CO2 emissions. Because it is very difficult for HI to decompose without the catalysts even at 500 °C, some catalysts have to be used to catalyze this reaction. In this study, four kinds of PtNi bimetallic catalysts supported on activated carbon (PtNi/C) were prepared by electroless plating and their catalytic activities were compared for HI decomposition in a fixed bed reactor at 400 and 500 °C under atmospheric pressure. Their differences in structures, surface areas, and morphology were characterized by XRD, BET and TEM, respectively. The used catalysts were also analyzed by TEM characterization in order to investigate the stability of catalysts. The results showed that the PtNi/C bimetallic catalysts are promising catalysts for HI decomposition because of their high activity and good stability, especially at high reaction temperature.