Single crystalline TiO2 nanorods with enhanced visible light activity for solar hydrogen generation

Single crystalline TiO2 nanorods and polycrystalline nanotubes were fabricated with same length to investigate the effects of their nanostructures on photocatalytic properties for splitting water. In order to enhance the visible light absorbance, TiO2 nanorods and nanotubes were sensitized with semiconductor nanoparticles such as CdS, CdSe, and CdS/CdSe, and compared in viewpoint of solar hydrogen generation. It was observed that single-crystalline nanorods showed superior photocatalytic properties to polycrystalline nanotubes, and also the potential level of the nanorods with rutile phase was measured as lower than that of the nanotubes with mixture of anatase and rutile. Further improvement of photo-conversion efficiency was obtained by subsequent heat treatments of the sensitized photoelectrodes. It turns out that the improvement is attributed to the improved crystallinity and the increased size of the nanoparticles during the post-annealing treatments. It was demonstrated that TiO2 nanorods with lower potential level and a single crystalline phase on FTO glass were advantageous for effective charge injection from the sensitized nanoparticles and transport without recombination lost at grain boundaries.