Determination of skin temperature distribution and heat flux during simulated fires using Greenʹs functions over finite-length scales

One of the current practices for measuring heat flux during flash fire testing, forest fires, and other industrial cases focuses on the use of semi-infinite models to predict the heat flux during exposure through surface temperature measurements on simulated skin sensors. For short time frames, these models can be shown to have acceptable accuracy. However, when considering longer time exposures at reduced heat fluxes, such as with firefighters in a forest fire, the accuracy of these models could be brought into question. A one-dimensional, finite length scale, transient heat conduction model was developed using a Greenʹs function approach on a rectangular sensor. The model was developed using transient temperature boundary conditions to avoid the use of complicated radiation and convection conditions at each boundary. For comparison, a semi-infinite model utilizing the same boundary condition on the exposed face was solved using both the Laplace transform method and Greenʹs function method. Experimental data was obtained during exposure to a cone calorimeter. All measurements were taken for a minimum duration of 2 min. This temperature data was used to develop appropriate curves for the boundary conditions and validate the analytical models. It was found that the temperature obtained from the one-dimensional transient heat conduction model based on Greenʹs functions agreed well with the experimental results over longer exposure times, and with reduced error when compared with the semi-infinite model. This suggests that modeling the problem on a finite-length scale will produce more accurate or more conservative temperature and heat flux results over extended periods of exposure in high heat load applications.