Automated electronic systems for the detection of oestrus and timing of AI in cattle

For the majority of dairy herds where artificial insemination (AI) is practiced, the limiting factor toward obtaining efficient reproductive performance is the failure to detect oestrus in a timely and accurate manner. Periodic visual observation has been the dominant method used to identify cows in oestrus. New approaches are being developed to provide automated systems of detection of oestrus using electronic technology. The goal of an oestrus detection program should be to identify oestrus positively and accurately in all cycling animals and consequently to identify animals not cycling. The ultimate goal should be to predict the time of ovulation, thus allowing for insemination that will maximize the opportunity for conception. Unfortunately, most studies designed to evaluate the optimal time of AI generally contained two technical deficiencies: inadequate numbers of cows for valid statistical comparisons and inaccurate knowledge of the onset of oestrus because of low frequency of visual observations and/or efficiency of methods used for the detection of oestrus. Studies using pedometry and a pressure sensing radiotelemetric system will be reviewed as each have independently obtained an optimal time of AI of 5 to 17 h after either the increase in locomotive activity or following the first standing event associated with the onset of oestrus.