Multiphase CFD–CHT optimization of the cooling jacket and FEM analysis of the engine head of a V6 diesel engine

The present paper proposes a numerical methodology aiming at analyzing and optimizing an internal combustion engine water cooling jacket, with particular emphasis on the assessment of the fatigue strength of the engine head. hree-dimensional CFD and FEM analyses of the conjugate heat transfer and of the thermo-mechanical loading cycles are presented for a single bank of a currently made V6 turbocharged Diesel engine under actual operating conditions. iled model of the engine, consisting of both the coolant galleries and the surrounding metal components is employed in both fluid-dynamic and structural analyses to accurately mimic the influence of the cooling system layout on the thermo-mechanical behavior of the engine. er to assess a proper CFD setup useful for the optimization of the thermal behavior of the engine, the experimentally measured temperature distribution within the engine head is compared to the CFD forecasts. Particular attention is paid to the modeling of the phase transition and of the vapor nuclei formation within the coolant galleries. -mechanical analyses are then carried out aiming at addressing the design optimization of the engine in terms of fatigue strength. Because of the wide range of thermal and mechanical loadings acting on the engine head, both high-cycle and low-cycle fatigue are considered. An energy-based multi-axial criterion specifically suited for thermal fatigue is employed in the low-cycle fatigue region (i.e. the combustion dome) while well-established multi-axial stress/strain-based criteria are adopted to investigate the high-cycle fatigue regions of the engine head (i.e. the coolant galleries). oposed methodology shows very promising results in terms of point-wise detection of possible engine failures and proves to be an effective tool for the accurate thermo-mechanical characterization of internal combustion engines under actual life-cycle operating conditions.