UV-photolysis assisted digestion of food samples for the determination of selenium by electrothermal atomic absorption spectrometry (ETAAS)

An UV-oxidation procedure has been developed to completely digest biological/food samples for the determination of trace levels of selenium. A combined use of UV photolysis and hydrogen peroxide in the presence of an oxidant (HNO3), results in the complete oxidation of the organic matter. This method is simpler and requires fewer reagents when compared with other sample pre-treatment procedures. The clear solution obtained was analysed for the selenium content by graphite furnace atomic absorption spectrometry. Unreduced palladium-nitrate modifier was used in all cases. However, in case of samples that are known to contain sulfur (like mushroom, Brazil nut, etc.), reduced palladium was used as modifier. The method was verified using three standard reference materials i.e., Whole egg powder-8415, Tuna fish-IAEA 350, Oyster tissue-1566a, and the results were in agreement at 95% confidence level. By using standards addition as calibration method, accurate results were obtained for the certified reference material, the precision for the CRM’s were in the range of 3.5–8%. The characteristic mass of selenium is assessed as 10 pg. The detection limits were in the range of 35–40 ng/g. uently the developed method was used for the determination of selenium in pumpkin seed, beetroot, Brazil nut, mustard seeds, curry leaves (Murraya koenigi), and wheat flour.