Effects of supercritical fluid extraction parameters on lycopene yield and antioxidant activity

The effects of various parameters of supercritical carbon dioxide (SC-CO2) fluid extractions of tomato skins on the extraction yields and antioxidant activities of lycopene-rich extracts were investigated. A Box–Behnken design was applied to study the effects of three independent variables (temperature ranging from 40 to 100 °C, pressure ranging from 20 to 40 MPa, and flow rate ranging from 1.0 to 2.0 mL/min) on lycopene yield. The model showed good agreement with the experimental results, by the coefficient of determination (r2 = 0.9834). Temperature, pressure, and the quadratic term for the temperature of SC-CO2 extraction were large significantly positive factors affecting lycopene yield (P < 0.05). The maximum total lycopene content of 31.25 μg/g of raw tomato was extracted at the highest temperature of 100 °C, 40 MPa and 1.5 mL/min. TEAC assay was applied to assess the antioxidant activity of lycopene-rich extracts from SC-CO2 fluid extraction. The effects of SC-CO2 fluid extraction parameters on the antioxidant activities of the extracts differed with the yield. For each unit of lycopene extract, the antioxidant activity level was constant below 70 °C, but then gradually decreased above 70 °C due to isomerization occurring as a result of the higher temperature. The ratio of all-trans-lycopene to the cis-isomers changed from 1.70 to 1.32 when the operating temperature was adjusted from 40 to 100 °C, indicating an increased bioavailability due to the generation of the cis-isomers. No significant effects of pressure or flow rate of SC-CO2 fluid extraction on the antioxidant activity were observed.