Theoretical and experimental investigation of desalting and dehydration of crude oil by assistance of ultrasonic irradiation

In this paper desalting/dehydration process of crude oil by ultrasonic irradiation in a novel batch standing-wave resonator reactor is studied both theoretically and experimentally. The effect of main parameters including ultrasonic irradiation parameters, namely irradiation input power and irradiation time, and also operating parameters, such as temperature and injected water, on the removal efficiencies of salt and water is examined. The obtained results demonstrate that finding the optimum values of the above mentioned parameters is important to prevent a significant decrease in the removal efficiencies of water and especially salt. Thus, crude oil was subjected to optimal ultrasonic irradiation with an input power of 57.7 W, and irradiation time of 6.2 min at temperature of 100 °C. The injected water to dissolve the salt of crude oil was 7 vol.%. Also, the applied settling time and dosage of chemical demulsifier were 60 min and 2 ppm, respectively. Under these optimum conditions the removal efficiencies of the desalting/dehydration process were 84% and 99.8%, respectively, which are suitable for refineries. based on the optimal experimental data, two inferential estimators are developed to obtain the relationships between the salt and water removal efficiencies, and input energy density. These empirical relationships can offer a proper estimation for the salt and water removal efficiencies with irradiation input energy.