Title of article
The control and monitoring system for the ATLAS semi-conductor tracker
Author/Authors
Llatas، نويسنده , , M. Chamizo and Abdesselam، نويسنده , , A. and Basiladze، نويسنده , , S. and Brenner، نويسنده , , R. and Codispoti، نويسنده , , G. and Ferrari، نويسنده , , P. and Mikulec، نويسنده , , B. and Phillips، نويسنده , , P. and Sandaker، نويسنده , , H. and Sfyrla، نويسنده , , A. and Stanecka، نويسنده , , E.، نويسنده ,
Pages
5
From page
163
To page
167
Abstract
The ATLAS Semi-Conductor Tracker (SCT) will be made of 4088 silicon modules mounted on four barrel supports and eighteen end cap disks. At present module production has started in different sites all around the world. The assembly of the modules into the support structures is taking place at three different macro-assembly sites. To allow for the safety operation of the detector a Detector Control System (DCS) is being developed at CERN that will be close to the final ATLAS configuration. The DCS will control and monitor the power supply provided to the modules, the cooling system and the environmental variables. This paper will give an overview of the system required to operate and readout large-scale silicon detectors.
Keywords
SCT , ATLAS , DCS , Silicon
Journal title
Astroparticle Physics
Record number
2026801
Link To Document