A phoswich well detector for radioxenon monitoring

One of several methods used to detect nuclear weapons testing is the monitoring of radioactive xenon in the atmosphere. For high sensitivity, monitoring stations use a complex system of separate beta and gamma detectors to detect beta–gamma coincidences from characteristic radioxenon isotopes in small amounts of xenon extracted from large volumes of air. ort a simpler approach that uses a single phoswich detector, comprising optically coupled plastic and CsI scintillators to absorb beta particles and gamma rays, respectively, and then detect coincidences by pulse shape analysis of the detector signal. Previous studies with a planar prototype detector have shown that the technique can clearly separate beta only, gamma only and coincidence events, does not degrade the energy resolution, and has an error rate for detecting coincidences of less than 0.1%. In this paper, we will present a new phoswich well detector design, consisting of a 1′′ diameter plastic cell enclosed in a 3′′ CsI crystal. Based on Monte Carlo modeling and experimental results, the design will be characterized in terms of energy resolution and its ability to separate beta and gamma only, and coincidence events.