Development of interconnect materials for solid oxide fuel cells

The state of the art development of interconnect materials for solid oxide fuel cells (SOFCs) is reviewed. The specific interconnect requirements from a materials design point of view are described in detail. Doped-LaCrO3 ceramics considered as interconnects for electrolyte-supported planar SOFC suffer from their extreme sensitivity to oxygen partial pressure and high manufacturing cost. Advent of anode-supported planar SOFC allows lower operating temperatures and great efforts have been directed towards the development of metallic interconnects. Chromia formed on the surface of chromium-based alloys are intrinsically too volatile to be viable as interconnects for SOFCs operating above 800 °C. Some intermediate phases occurring between iron-based interconnect and cathode significantly increase the contact resistance. Metallic materials that are capable of developing stable oxide scales with acceptable growth rate and reasonably high electrical conductivity over the expected SOFC lifetime need to be developed.