EBL- and AFM-based techniques for nanowires fabrication on Si/SiGe

Two approaches for sub-100 nm patterning are applied to Si/SiGe samples. rst one combines electron beam lithography (EBL) and anisotropic wet etching to fabricate wires with triangular section whose top width is narrower than the beam size. Widths as small as 20 nm on silicon and 60 nm on Si/SiGe heterostructures are obtained. cond lithographic approach is based on the local anodization of an aluminum film induced by an atomic force scanning probe. Using atomic force microscopy (AFM) anodization and selective wet etching, aluminum and aluminum oxide nanostructures are obtained and used as masks for reactive ion etching (RIE). Sub-100 nm wide wires are fabricated on Si/SiGe substrates.