Elaboration of a new hydrogen peroxide biosensor using microperoxidase 8 (MP8) immobilized on a polypyrrole coated electrode

A novel strategy for elaborating a new biosensor for hydrogen peroxide has been developed by combining the known properties of microperoxidase 8 (MP8) as an oxidation catalyst, and the interesting properties of conducting polypyrrole as a supporting matrix to allow a good bioelectrochemical interface and a large dispersion of MP8 on the modified glassy carbon electrode. s immobilized into the conducting polypyrrole by entrapment during the electrochemical polymerization, and the modified electrode was characterized both by electrochemical and FT-IR measurements. We demonstrated that MP8 could be immobilized into polypyrrole and could undergo an efficient electron transfer. tained modified electrode showed a high catalytic activity toward H2O2 without the need for an electron mediator. A linear calibration curve was obtained by amperometric measurement at a potential of − 0.1 V/ECS for concentrations of H2O2 ranging from 1 to 10 μM. The detection limit obtained was 1 nM which constituted a real improvement, by about three orders of magnitude, when compared to the values reported for other systems using an electrochemical detection.