Microstructural influence on the intrinsic fatigue properties of AlLi 8090 alloy

A study has been made to investigate the influence of microstructure on the extrinsic and intrinsic fatigue properties of the AlLi alloy, 8090. Two types of microstructure have been produced to compare the relative fatigue properties, one with a δ′ phase dominant microstructure and the other with a S′ + δ′ microstructure. Crack closure loads measured by the crack-opening displacement method have been used to obtain intrinsic fatigue resistance of the δ′ and S′ + δ′ microstructures. Results have shown that the extrinsic fatigue resistance of the δ′ microstructure was considerably higher than that of the S′ + δ′ microstructure, especially at lower growth rate, which was mainly due to the more severe crack path tortuosity and associated high levels of crack closure. In addition, the intrinsic fatigue resistance of the δ′ microstructure was also observed to be higher than that of the S′ + δ′ microstructure, presumably due to greater slip reversibility in the δ′ microstructure.