Title of article :
Subgrain development in hot working of Al and Al-5Mg
Author/Authors :
McQueen، نويسنده , , H.J. and Poschmann، نويسنده , , I.، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 1997
Abstract :
Over the range 400–500 °C at 1.16 s1, Al flow curves exhibit monotonic hardening to attain, by strains of 0.9–2.8, true steady states. The elongated helicoidal grains were observed on planes normal to the radius by both SEM-EBSI and by TEM. The equiaxed subgrain sizes in Al exhibited a log normal distribution, as temperature rises, the mean and S.D. rise so that the distribution widens considerably at the upper end. In contrast for Al-5Mg, the flow curves rise to a peak and decline slowly at a diminishing rate, the maximum strength is about four times that of Al. In TEM, the dislocations are in long planar arrays at ε = 0.2 whereas the SEM-EBSI indicates only indistinct distortions. At 0.45 the subgrains are very elongated. At 1.8 and 2.8, the subgrains are equiaxed at 1.4 μm. being about 1/3 that of Al (~3.9 μm).
Keywords :
Al alloys , Subgrains , solute drag , hot working
Journal title :
MATERIALS SCIENCE & ENGINEERING: A
Journal title :
MATERIALS SCIENCE & ENGINEERING: A