Title of article
The appearance of magnesium and its effect on the mechanical properties of Inconel 718 with low sulfur content
Author/Authors
Liu، نويسنده , , Xingbo and Dong، نويسنده , , Jianxin and Xie، نويسنده , , Xishan and Chang، نويسنده , , Keh-Minn، نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2001
Pages
5
From page
262
To page
266
Abstract
The appearance of magnesium and its effect on the mechanical properties of Inconel 718 with low sulfur content were investigated. The results show that magnesium has almost no effect on the tensile properties of Inconel 718 at room temperature, 500°C and 650°C. When the content of sulfur is lower than 10 ppm, magnesium can decrease the stress rupture life of Inconel 718 at 650°C, 686 MPa. The fractography and microstructure analysis by means of scanning electron microscopy (SEM) reveal that magnesium has little effect on the rupture method and microstructure of Inconel 718, i.e. grain size and δ-phase, etc. The Auger research shows that there is no segregation of magnesium at grain boundaries. The main appearance method of magnesium is Mg(O,S).
Keywords
Inconel 718 , microstructure , Sulfur , fractography
Journal title
MATERIALS SCIENCE & ENGINEERING: A
Serial Year
2001
Journal title
MATERIALS SCIENCE & ENGINEERING: A
Record number
2139921
Link To Document