Effect of dual torch technique on duplex stainless steel welds

Duplex stainless steels are characterized by balanced ferrite/austenite microstructures and are well known for their superior corrosion resistance and higher strength compared with the common austenitic stainless steels. One major concern, however, is that welding might degrade the corrosion resistance by producing unbalanced phase content, detrimental precipitates, and possible embrittlement of the weldment. In this paper, a dual-torch arc welding technique (plasma torch followed by a gas tungsten arc (GTA) torch) was proposed. Effects of the dual-torch technique on the microstructural changes and corrosion properties were investigated. The preliminary study indicated that a correlation between the welding parameters and the microstructural changes and corrosion resistance existed. It was found that the corrosion rate increases with increasing torch pitch and/or decreasing GTA welding current. By adjusting the distance between the torches, modification of weld microstructure may be realized. Although further studies are required to fine-tune the technique, the present study demonstrated the potential of using dual torch technique to improve weldability of duplex stainless steels.