Predictive modeling of multi-track laser hardening of AISI 4140 steel

Laser hardening provides benefits over the conventional hardening processes, including minimum distortion in the parts and the absence of a quenchant. This process is also faster than conventional hardening processes and can be used for selective hardening of specific areas of components. One known problem with laser hardening in steels, however, is back tempering when a large area is hardened by multiple, overlapping passes. This study focused on the development of a numerical model to predict the back tempering in multi-track laser hardening. A tempering model was combined with existing models of thermal behavior and phase change kinetics, which were developed earlier in the authors’ group, to predict three-dimensional hardness profiles after multiple track laser hardening. The combined model was first validated through multi-track laser hardening tests and then used to predict and optimize the laser hardened case depth in multi-track laser hardening of AISI 4140 steel. The predictions and parameters optimized to obtain maximum case depth with the least variation along width of the hardened zone were experimentally verified. Case depths up to 2 mm were obtained with 5 mm overlapping of laser tracks.