• Title of article

    Hypervelocity impact damage to Ti–6Al–4V meshes reinforced Al–6Mg alloy matrix composites

  • Author/Authors

    Zhu، نويسنده , , Dezhi and Chen، نويسنده , , Guoqin and Wu، نويسنده , , Gaohui and Kang، نويسنده , , Pengchao and Ding، نويسنده , , Wei، نويسنده ,

  • Issue Information
    روزنامه با شماره پیاپی سال 2009
  • Pages
    4
  • From page
    43
  • To page
    46
  • Abstract
    An Al–6Mg alloy matrix composite reinforced with Ti–6Al–4V meshes was fabricated by pressure infiltration method; its damage behaviors impacted by hypervelocity aluminum projectiles were investigated. Results showed that the thin Tif/Al–6Mg composite target exhibits better protection efficiency and energy absorption ability than Al–6Mg alloy target. With projectile sizes increasing, bulge and spallation were observed on the back of the composite target. The Ti–6Al–4V meshes were tensed and deformed drastically in the spallation region, where micro-damages such as interfacial debonding and cracks were dominant. Shear localization was the primary failure characteristic for thin Al–6Mg alloy target. The adiabatic shear bands were observed near the crater of Al–6Mg alloy, not in Tif/Al–6Mg composite target. It was ascribed to the Ti–Al interfacial bonding strength and the high temperature strength for Ti–6Al–4V alloy.
  • Keywords
    Projectile , Micro-damage , Metal–matrix composites , hypervelocity impact
  • Journal title
    MATERIALS SCIENCE & ENGINEERING: A
  • Serial Year
    2009
  • Journal title
    MATERIALS SCIENCE & ENGINEERING: A
  • Record number

    2158862