Grain boundary plane distributions and single-step versus multiple-step grain boundary engineering

The ‘five-parameter’ (i.e. both misorientation and grain boundary plane) distribution in type 304 austenitic stainless steel has been measured and evaluated for an ‘as-received’ (AR) specimen and specimens undergoing both single-step grain boundary engineering processing (SSGBE) and multiple-step grain boundary engineering processing (MSGBE) comprising three iterations. The results showed that the fundamental requirement for twinning-related GBE is to maximise concomitantly the proportion of both Σ3 and Σ9 boundaries, which in turn supports the development of special planes in the grain boundary network. 〈1 1 0〉 and 〈1 1 1〉 tilt and twist boundaries play a key role in the formation of ‘special’ grain boundary planes. MSGBE added increased proportions of Σ3 boundaries and resulted in development of different characteristics in the planes distribution compared to SSGBE. These modifications are likely to result in improved grain boundary properties after MSGBE compared to SSGBE.