Mitigation of damage from molten fly ash to air-plasma-sprayed thermal barrier coatings

Ceramic thermal barrier coatings (TBCs) used in gas-turbine engines afford higher operating temperatures, resulting in enhanced efficiencies and performance. However, in the case of syngas-fired engines, fly ash particulate impurities that may be present in syngas can melt on the hotter TBC surfaces and form glassy deposits. These deposits can penetrate the TBCs leading to their failure. In experiments using lignite fly ash to simulate these conditions we show that conventional TBCs of composition 93 wt% ZrO2 + 7 wt% Y2O3 (7YSZ) fabricated using the air plasma spray (APS) process are completely destroyed by the molten fly ash. The molten fly ash is found to penetrate the full thickness of the TBC. The mechanisms by which this occurs appear to be similar to those observed in degradation of 7YSZ TBCs by molten calcium–magnesium–alumino–silicate (CMAS) sand and by molten volcanic ash in aircraft engines. In contrast, APS TBCs of Gd2Zr2O7 composition are highly resistant to attack by molten lignite fly ash under identical conditions, where the molten ash penetrates ∼25% of TBC thickness. This damage mitigation appears to be due to the formation of an impervious, stable crystalline layer at the fly ash/Gd2Zr2O7 TBC interface arresting the penetrating molten-fly-ash front.