Title of article :
Sub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloy
Author/Authors :
Tolnai، نويسنده , , D. and Requena، نويسنده , , G. and Cloetens، نويسنده , , P. and Lendvai، نويسنده , , J. and Degischer، نويسنده , , H.P.، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2012
Abstract :
A strip cast AlMg7.3Si3.5 alloy is investigated by sub-micrometre holotomographic analysis achieving a voxel size of (60 nm)3 by cone beam magnification of the focused synchrotron beam using Kirkpatrick–Baez mirrors. The three-dimensional microstructure of the same specimen volume in the as-cast state is compared with that after exposure to 540 °C for 30 min resolving microstructural features down to 180 nm. The three-dimensional analysis of the architecture of the eutectic Mg2Si and the Fe-aluminides reveals how the as-cast microstructure changes during the solution treatment. The alloy in the as-cast condition contains a highly interconnected seaweed-like Mg2Si eutectic. The level of three-dimensional interconnectivity of the Mg2Si eutectic phase decreases by only partial disintegration during the heat treatment correcting the two-dimensional metallographic impression of isolated round particles. Statistical analyses of the particle distribution, sphericity, mean curvatures and Gaussian curvatures describe quantitatively the architectural changes of the Mg2Si phase. This explains the decrease of the high temperature strength of the alloy by the solution treatment tested in hot compression.
Keywords :
Synchrotron tomography , Mechanical characterisation , Cast Al–Mg–Si alloys , Coarsening , Aluminium alloys
Journal title :
MATERIALS SCIENCE & ENGINEERING: A
Journal title :
MATERIALS SCIENCE & ENGINEERING: A