Title of article :
Uniaxial ratchetting of extruded AZ31 magnesium alloy: Effect of mean stress
Author/Authors :
Kang، نويسنده , , Guozheng and Yu، نويسنده , , Chao and Liu، نويسنده , , Yujie and Quan، نويسنده , , Gaofeng، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2014
Abstract :
The uniaxial ratchetting of extruded AZ31 magnesium alloy was investigated in the cyclic tests with different mean stresses and at room temperature. The prescribed mean stresses and corresponding stress amplitudes were chosen to make the different plastic deformation mechanisms such as dislocation slipping, twinning and detwinning occur individually or simultaneously during the cyclic deformation of the AZ31 magnesium alloy with a hexagonal close packed crystal structure, and then the effect of mean stress on the uniaxial ratchetting of the magnesium alloy was discussed. It is seen that ratchetting occurs in the AZ31 magnesium alloy during the stress-controlled cyclic loading, but different evolution features are observed in the uniaxial ratchetting tests with different mean stresses. Different ratchetting behaviors are determined by the different deformation mechanisms of extruded AZ31 magnesium alloy occurring in the tensile and compressive parts of cyclic loading. A sigmoidal stress–strain hysteresis loop of the magnesium alloy presented in the cyclic tension–compression tests with some suitable mean stresses and stress amplitudes is caused by the twinning/detwinning deformation mechanism, which should be reasonably considered in constructing a cyclic constitutive model to describe the uniaxial ratchetting of magnesium alloys.
Keywords :
Magnesium alloy , Ratchetting , Twinning/detwinning , Dislocation , Mean stress
Journal title :
MATERIALS SCIENCE & ENGINEERING: A
Journal title :
MATERIALS SCIENCE & ENGINEERING: A