Comparison of surface slip and focal mechanism slip data along normal faults: an example from the eastern Gulf of Corinth, Greece

Focal mechanism and surface slip data are used to investigate whether kinematics are similar at depth and at the surface along an active normal fault in the Gulf of Corinth, Greece. We present a new database of slip data from the lateral termination of the South Alkyonides fault segment (SAFS) and the en échelon stepover between it and an adjacent fault, and use published data on surface slip and focal mechanism data pertaining to slip at depth during the 1981 Alkyonides earthquake sequence. The focal mechanisms exhibit similar fault plane orientations and kinematics to those measured at the surface. Within the stepover, both data sets show that contemporaneous c. N–S and c. E–W extension is being accommodated by c. E–W- and c. N–S-oriented normal faults, and the overall deformation is distributed oblate vertical flattening. The deviation of the surface slip direction from 350° increases with distance from the centre of the SAFS. The deviation of the focal mechanism T-axes from 350° fit well with the surface data, implying that the coseismic slip on the SAFS at depths of 7–10 km exhibits a similar kinematic pattern as that observed at the surface. Our results imply that it is critical to know the along-strike position of data on a fault if either focal mechanisms or surface slip are to be used to infer regional strain and stress trajectories.