Architectural characteristics and petrophysical properties evolution of a strike-slip fault zone in a fractured porous carbonate reservoir

This paper describes the structural, petrophysical and hydromechanical properties relationships between a small fault zone and the porous layered carbonate series which host it. In a gallery located at 250-m depth, the deformation of a 22-m thick section of layered carbonates-, affected by a strike slip-fault have been characterized by means of structural (Q-value), acoustic velocities (Vp), porosity and uniaxial compressive strength (σc) measurements conducted in situ at the meter scale, and on laboratory samples at the infra-centimeter scale. A clear influence of the layers initial properties on fault architecture and properties evolution is underlined. In the porous layers with a low σc, there is an important accommodation of the deformation by micro-mechanisms resulting in a progressive decrease in the porosity toward the fault core. In the low-porosity layers with a high σc, deformations are accommodated toward the fault core by: an increase in the fracture porosity, in the micro-cracks porosity, and by displacements along pre-existing fractures resulting from a joint roughness decrease. The fault zone appears as relatively stiff and low permeable zones intercalated with low stiffness and high fracture permeability zones that extend one to tens of meters from the fault following the initial properties contrasts and geometry of the sedimentary layers.