Title of article
The Diavik Waste Rock Project: Persistence of contaminants from blasting agents in waste rock effluent
Author/Authors
Bailey، نويسنده , , Brenda L. and Smith، نويسنده , , Lianna J.D and Blowes، نويسنده , , David W. and Ptacek، نويسنده , , Carol J. and Smith، نويسنده , , Leslie and Sego، نويسنده , , David C.، نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2013
Pages
15
From page
256
To page
270
Abstract
During mining operations, explosives are used to fragment rock into workable size fractions. Mine-water chemistry can be affected by blasting agent residuals, including NH3, NO 2 - , NO 3 - , Cl−, and ClO 4 - . At the Diavik diamond mine, Northwest Territories, Canada, waste rock generated from open-pit and underground mining is stockpiled on site. Three large-scale test piles measuring 60 by 50 m at the base and 15 m in height, along with four 2 × 2 m lysimeters each 2 m in height, were constructed at Diavik as part of a comprehensive research program to evaluate the quality of water emanating from waste rock stockpiles. Ongoing monitoring of the water chemistry since 2007 shows that blasting residuals comprise a large proportion of the dissolved constituents in the initial pore water and effluent. Leach tests conducted on freshly blasted rock from Diavik indicate the mass of N released corresponds to a 5.4% N loss from the blasting explosives; this mass is in the range for N loss reported for blasting operations at Diavik during the period when the test piles were constructed. The total mass of N released from the lysimeters was also within this range. The three large-scale test piles have only released a small fraction of the N estimated to be contained within them. Blasting of waste rock contributes SO 4 2 - to effluent through the oxidation of sulfide minerals in the rock during the blast. During the initial flush of water, the test pile that contained waste rock with the higher S content was observed to release higher concentrations of SO 4 2 - than the test pile with lower S content waste rock. Mass-balance calculations based on the ratios of SO 4 2 - to total N can be used to estimate the relative contributions of sulfide oxidation within the test piles and SO 4 2 - released when S in the host rock is oxidized during blasting. These calculations provide an estimate of S mass released during the first flush of the test piles.
Journal title
Applied Geochemistry
Serial Year
2013
Journal title
Applied Geochemistry
Record number
2233476
Link To Document