Development of a vehicle to study the tractive performance of integrated steering-drive systems

This paper describes a test-bed vehicle for studying the integration of the steering system of a wheeled vehicle with the drive system. The vehicle was produced in order to determine whether such an integrated system is practical; to investigate tractive performance compared to other steering-drive systems; and to determine under which conditions such a system has better performance. The integrated steering-drive system of the test-bed vehicle uses a computer to co-ordinate the independently driven wheel speeds of the drive system (which is also the primary steering system) with the steer angles of the non-driven steerable wheels to produce a beneficial secondary steering effect. The secondary steering system assists the primary steering system when side forces act on the vehicle, while producing minimal conflict. This concept can be applied to agricultural vehicles such as tractors, harvesters, mowers, sprayers and self-propelled windrowers. The test-bed vehicle is able to be configured for the following steering-drive systems types: open differential drive with steerable wheels, independent drive wheels with castors, locked differential drive with steerable wheels and a computer integrated steering-drive system. The capacity of the test-bed vehicle to be configured as described is a significant advantage when measuring tractive performance, as the results obtained will be more valid due to the vehicle parameters being the same.