Lubrication using porous surface layer for cold drawing of steel wire

As a lubricant for steel cold working, metal soap on zinc phosphate coating is widely used. However the lubrication causes hazardous wastes, and hence an alternative system is demanded. The authors proposed to utilize porous layer on workpiece surface as a reservoir of liquid lubricant. In this study, 0.64%C steel wires were oxidized at 923 K under air and chemically reduced by pure hydrogen to form porous surface layer with pores 1–2 μm in diameter. In cold drawing with machine oil, the friction coefficient on the porous surface was 0.06, while that on normal surface was 0.11. The lubrication mechanism with porous surface is discussed.