Numerical study of generation of the tidal shear front off the Yellow River mouth

Tidal shear front off the Yellow River mouth has been observed and modeled in the previous studies. However, a detailed investigation of the front generation has not been conducted. The aim of this paper is to use a three-dimensional tidal model coupled to a sediment transport module to examine the front formation. The model predicted a tidal shear front that propagated offshore and lasted 1–2 h at both flood and ebb phase off the Yellow River mouth. The sensitivity numerical experiments showed that the topography with a strong slope off the Yellow River mouth was a determining factor for the front generation, and a parallel orientation between the major axes of ellipses and co-tidal lines of maximum tidal current was a necessary condition. While the bottom friction and the river runoff had no effect on the front location but affected the front intensity, the front generation was not sensitive to the coastline variation. The study concluded that the bottom slope off the river mouth induces a strong variation in the bottom stress in a cross-shore direction, which produces both maximum phase gradient and sediment concentration variability across the tidal shear front. With the extending Yellow River delta, the tidal shear front under the new bathymetry of year 2003 has been strengthened and pushed further offshore due to an increased bottom slope.