Using surface and cross-hole resistivity tomography in an urban environment: An example of imaging the foundations of the ancient wall in Thessaloniki, North Greece

This work describes the application of the electrical resistivity tomography (ERT) technique, in both surface and cross-hole modes, for subsurface exploration in an urban environment. The objective was to image the foundations of the Thessaloniki city walls (Region of Macedonia, North Greece) at locations that will be affected by the construction of a new underground Metro line. rface ERT survey was performed along lines crossing directly over the wall on areas where it had partly collapsed. ERT surveys were also applied at places where the main over ground structure of the walls had been completely destroyed and what is left now is primarily only the ancient subsurface foundations. In addition, the present day ground surface is partially covered by concrete pavement slabs. In both cases, nonconventional electrodes were partially used to carry out a number of ERTs on the ground surface. This was necessary in order not to destroy the pavement slabs and most importantly not to damage in any way the monuments. mple of cross-hole ERT is also presented. Cross-hole ERTs were conducted because detailed measurements employing surface ERT were not possible due to limitations imposed by the urban environment. The way that the boreholes were instrumented is also presented. The combined surface and borehole tomographies produced images of the buried structures allowing the assessment of their geometrical shape and of the dimensions of the foundations of the ancient wall.