Huygens/HASI 2002 balloon test campaign: Probe trajectory and atmospheric vertical profiles reconstruction

In the framework of the activities going on in preparation for the mission of the Huygens probe in Titanʹs atmosphere (January 2005), the Huygens Atmospheric Structure Instrument (HASI) team scheduled and performed several balloon campaigns to test the HASI sensors’ performance in flight conditions in the Earthʹs atmosphere. In particular, pressure conditions reached during each test are similar to those expected in Titanʹs lower atmosphere. A 1:1 scaled mock-up of the Huygens probe was launched with a stratospheric balloon in 2001 (Br. Assoc. Adv. Sci. 33 (2001) 1109) and in 2002 (Br. Assoc. Adv. Sci. 34 (2002) 911; Adv. Space. Sci. (2003)) from the G. Broglio base of the Italian Space Agency, located in Trapani Milo (Sicily). In both cases the mock-up was dropped from an altitude higher than 27 and 32 km, respectively, and recovered on the ground after a parachuted descent. In this paper, we describe the results obtained in reconstructing (i) the probe descent trajectory and (ii) the profiles of the physical quantities characterizing the Earthʹs atmosphere, on the basis of a complete analysis of the data obtained during the HASI 2002 balloon flight experiment. Using temperature and pressure measurements, we are able to reach an accuracy of the order of 0.5% on the altitude reconstruction during the descent. We validate both the models used for trajectory reconstruction and to check the sensors’ performance. We describe the problems faced in determining the Huygens probe descent trajectory in Titanʹs atmosphere focusing our discussion on the critical aspects of the descent reconstruction (such as the uncertainties due to measurement errors, limited knowledge of the atmospheric composition, etc.) and the validity of the adopted assumptions.