Title of article :
Influence Parameter Research on the Low Cycle Fatigue Life for Welded I-Section Bracings
Author/Authors :
Li، نويسنده , , Qilian and Yu، نويسنده , , Haifeng and Du، نويسنده , , Shoujun، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2012
Abstract :
A survey of past test and numerical simulation studies on the low cycle fatigue behaviour of the welded I-section bracing members subjected to constant amplitude cyclic axial displacement was carried out. Based on the numerical simulation results, some empirical formulas for estimating the low cycle fatigue life are presented and compared with the empirical formulas obtained by tests. Itʹs found that the web plate height-thickness ratio h0/tw has no significant effect on the low cycle fatigue life, and the flange width-thickness ratio b/t and the slendernessare the most important parameters for estimating the low cycle fatigue life. In view of the low cycle fatigue life increasing with the decrease in the flange width-thickness ratio and the increase in the brace slenderness ratio, small flange width-thickness ratio and large slenderness ratio should be adopted in the brace design on the premise of “no buckling under frequent earthquake”.
Keywords :
Bracing member , low cycle fatigue life , flange width-thickness ratio , slenderness ratio , web plate height-thickness ratio
Journal title :
Procedia Earth and Planetary Science
Journal title :
Procedia Earth and Planetary Science