Lime stabilization of clay minerals and soils

Clay soil can be stabilized by the addition of small percentages, by weight, of lime, thereby enhancing many of the engineering properties of the soil and producing an improved construction material. In order to illustrate such improvements, three of the most frequently occurring minerals in clay deposits, namely, kaolinite, montmorillonite and quartz were subjected to a series of tests. As lime stabilization is most often used in relation to road construction, the tests were chosen with this in mind. Till and laminated clay were treated in similar fashion. With the addition of lime, the plasticity of montmorillonite was reduced whilst that of kaolinite and quartz was increased somewhat. However, the addition of lime to the till had little influence on its plasticity but a significant reduction occurred in that of the laminated clay. All materials experienced an increase in their optimum moisture content and a decrease in their maximum dry density, as well as enhanced California bearing ratio, on addition of lime. Some notable increases in strength and Youngʹs Modulus occurred in these materials when they were treated with lime. Length of time curing and temperature at which curing took place had an important influence on the amount of strength developed.