Stress intensity factor for center-cracked plate with crack surface interference

This paper presents a simple and physically acceptable analysis of stress intensity factor (SIF) for the center-cracked infinite and finite-width plates. The analysis includes the effect of crack surface interference (i.e., the upper and lower crack surfaces are not allowed to overlap) that influences both the SIF at the tension-side crack tip and the crack opening displacement (COD) profile. For an infinite plate, exact solutions are obtained by superimposing the classical (overlapping) solutions. For a finite-width plate, where the SIF solutions cannot be found in closed form, the solutions are carried out numerically. The overlapping SIF solutions from the weight function method are used. An example is given for the case of a finite-width plate under bending. It was found that the overlapping solutions underestimate the stress intensity factor at the tension-side crack tip up to 15%. The analysis results are also compared with the finite element solutions for verification purpose.