Selection of the critical plane orientation in two-parameter multiaxial fatigue failure criterion under combined bending and torsion

The present paper is focused on engineering application of the algorithm of fatigue life calculation under multiaxial fatigue loading. For that reason, simple two-parameter multiaxial fatigue failure criterion is proposed. The criterion is based on the normal and shear stresses on the critical plane. Experimental results obtained under multiaxial proportional, non-proportional cyclic loading and variable-amplitude bending and torsion were used to verify the proposed two-parameter criterion and other well-known multiaxial fatigue criteria. Elastic–plastic behaviour of the bulk material was taken into account in calculation of the stress/strain distribution across the specimen cross-section. It is shown that the proposed two-parameter multiaxial fatigue failure criterion gives the best correlation between the experimental and calculated fatigue lives.