Inverse problem of material distribution for desired fracture characteristics in a thick-walled functionally graded material cylinder with two diametrically-opposed edge cracks

This study concerns the inverse problem of evaluating the optimum material distribution for desired fracture characteristics in a thick-walled functionally graded material (FGM) cylinder containing two diametrically-opposed edge cracks emanating from the inner surface of the cylinder. The thermal eigenstrain developed in the cylinder material due to nonuniform coefficient of thermal expansion as a result of cooling from sintering temperature is taken into account. Based on a generalized method of evaluating stress intensity factors developed in a previous study, an inverse method is developed to optimize material distribution intending to realize prescribed apparent fracture toughness in the FGM cylinder. To present some numerical results, a TiC/Al2O3 FGM cylinder is considered and the inverse problems are solved to evaluate material distributions for two examples of prescribed apparent fracture toughness. The effect of cylinder wall thickness on the material distribution and comparison of material distributions corresponding to a single and two cracks are also discussed. The numerical results reveal that the apparent fracture toughness of FGM cylinders can be controlled by choosing the material distributions properly.