An investigation of the relationship between uniaxial compressive strength and degradation for selected rock types

The relationship between uniaxial compressive strength and degradation was investigated for selected rock types, by using regression analyses to determine whether degradation was a useful predictor of compressive strength. In addition, the effects of aggregate particle size, number of hammer blows during the degradation test, engineering index properties, petrographic characteristics, and water saturation on the compressive strength-degradation relationship were evaluated. The results show that strong inverse relationships exist between compressive strength and degradation (measured on a 9.5-4.75-mm size aggregate) for sandstones and igneous/metamorphic rocks, but that no significant relationship exists for limestones/dolomites. The results also indicate a strong positive correlation between degradation and L.A. abrasion loss and can be used to establish a limit of allowable degradation for practical applications. Engineering index properties do not significantly affect the relationship between compressive strength and degradation but petrographic characteristics are important in explaining the strength and degradation behavior of the rocks studied. Water saturation decreases compressive strength and increases degradation to varying degrees.