Strain parameters of discontinuities in rock for finite element calculation

The bulk strain induced by excavation of rooms for storage of highly radioactive waste is usually unimportant, but the change in aperture and shear displacement of permeable fractures may be of practical importance. Hence, the normal and shear of such discontinuities have to be considered and are commonly predicted by using special deformation moduli termed “normal” and “shear” stiffnesses in numerical calculations. For the use of some finite element methods, these have to be converted to compression and shear moduli ,which, in turn, requires that the thickness of the discontinuity is known. The normal and shear strain can be expressed in terms of soil mechanical parameters, yielding the compression modulus M and the shear modulus G, with the required form for finite element calculations. By definition they are functions of the normal and shear stiffness Kn and Ks. It is concluded that calculation of the normal and shear strain of discontinuities with clastic fillings by the use of finite element methods and deformation moduli derived from stiffness numbers is very uncertain except when the geometry of the weaknesses can be accurately defined.